Artsound Arcus-EDS KNX Interface for Smart Audio products
- Operating voltage:9 .. 30VDC max. 1,5W 2-pin terminal with screws
- Terminal bus voltage:KNX 2-pin terminal ( red / black )
- Power consumption (KNX):Approx. 120mW (at 24V DC)
- Ambient temperature:Storage -25 .. +85°C
- Ethernet:10/100 Mbit/s RJ45
Δωρεάν παραλαβή από το κατάστημα
Περιγραφή
The KNX-GW-IP-2TE is used for coupling the ETS ( PC software tool ) via Ethernet to the KNX bus for addressing and programming KNX components.
Using the KNX-group monitor allows for the monitoring and transfer of telegrams via the KNX-bus in real time. The site of the KNX-group monitor is subdivided into a configuration and a telegram section.
The KNX-IP-gateway is able to save telegrams. The KNX-telegram logger lists the saved telegrams. It is possible to set a timeframe as well as a group address filter.
To visualize the data, up to three different group addresses can be displayed in one graph.
The gateway can link html-sites with KNX-files and visualize them in every browser, provided that websockets are supported.
Χαρακτηριστικά
- Operating voltage
- 9 .. 30VDC max. 1,5W 2-pin terminal with screws
- Terminal bus voltage
- KNX 2-pin terminal ( red / black )
- Power consumption (KNX)
- Approx. 120mW (at 24V DC)
- Ambient temperature
- Storage -25 .. +85°C
- Ethernet
- 10/100 Mbit/s RJ45
