Showing all 3 results

Raspberry Pi 3 official MicroUSB Netzteil 5.1V / 2.5A black

13,36
  • Output Voltage +5.1Vdc
  • Minimum Load Current 0A
  • Nominal Load Current 2.5A
  • Nominal Output Power 13W
  • Output Regulation +/-5%
  • Line Regulation +/-2%
  • Ripple & Noise 120mVp-p Maximum
  • Rise Time 100mS Maximum at nominal input
  • Turn-on Delay 3 Seconds Maximum at nominal input
  • Protection Short circuit, over current, over voltage
  • Efficiency 80.86%
  • Output Cable 1500mm Micro USB B 5 Pin

Raspberry Pi 3 Model A+

36,77
  • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
  • 512MB LPDDR2 SDRAM
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
  • Extended 40-pin GPIO header
  • Full-size HDMI
  • Single USB 2.0 ports
  • CSI camera port for connecting a Raspberry Pi Camera Module
  • DSI display port for connecting a Raspberry Pi Touch Display
  • 4-pole stereo output and composite video port
  • Micro SD port for loading your operating system and storing data
  • 5V/2.5A DC power input

Raspberry Pi 3 Modell B+

46,77
 
Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoC
Memory: 1GB LPDDR2 SDRAM
Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac
Ethernet: Gigabit Ethernet over USB 2.0 (300Mbps max)
USB: Four USB 2.0 ports
Connection: GPIO Header 40-pin
HDMI: 1 x full size
Video: MIPI DSI display port, MIPI CSI camera port & 4 Pole stereo output and composite video port
Multimedia: H.264, MPEG-4 decode (1080p30). H.264 encode (1080p30). OpenGL ES 1.1, 2.0 graphics
Storage: microSD card slot for loading operating system and data storage
Power: USB connector for 5.1V / 2.5A dcPOE enabled