Anycubic
Anycubic SP Kobra 3 max/combo Press-fit head
Κωδικός παραγγελίας: 30781
- Compatible Models:Anycubic Kobra 3 / Kobra 3 Combo / Kobra 3 Max
- Tubing Compatibility:Standard 4 mm OD PTFE Guide Tubes
- Filament Compatibility:1.75 mm (PLA, PETG, ABS, TPU, ASA, Composites)
- Materials:Injection-molded engineering plastic with stainless steel locking clip.
- Releasing the PTFE Tube Properly:Never yank the PTFE tube directly out. Push the top collar ring down against the housing body to collapse the internal steel teeth before pulling the tube straight up.
- Όλα τα χαρακτηριστικά
4,99 €με ΦΠΑ
Αποστολή σε 2-4 εργάσιμες
Δωρεάν παραλαβή από το κατάστημα
Περιγραφή
- The Anycubic Kobra 3 Series / Kobra 3 Max Press-Fit Head / Pneumatic Joint Assembly is the specialized quick-release push-in fitting mounted atop the toolhead cover and filament hub module.It serves as the main mechanical securing mechanism for anchoring the reverse-bowden PTFE guide tubes (4 mm outer diameter). It allows the 1.75 mm filament strands to glide smoothly from the ACE Pro multi-color engine into the extruder drive gears without buckling or becoming dislodged during high-retraction movements.
- Internal Spring-Steel Gripping Teeth: Houses a ring of hardened stainless-steel retention teeth that bite lightly into the outer wall of 4 mm PTFE tubing to prevent accidental pull-outs under heavy retraction forces.
- Depressible Quick-Release Ring: Features a spring-loaded top collet ring that, when pressed down, retracts the internal metal teeth to allow fast, toolless removal of the PTFE guide tube.
- Smooth Funnel Geometry: Formed with a chamfered inner bore that prevents filament tips from catching or snagging when feeding new colors from the ACE Pro hub.
- Vibration-Resistant Press-Fit Mount: Press-fits flush into the printhead housing frame, maintaining alignment with the extruder entry channel during rapid directional shifts at print speeds up to 600 mm/s.
Χαρακτηριστικά
- Compatible Models
- Anycubic Kobra 3 / Kobra 3 Combo / Kobra 3 Max
- Tubing Compatibility
- Standard 4 mm OD PTFE Guide Tubes
- Filament Compatibility
- 1.75 mm (PLA, PETG, ABS, TPU, ASA, Composites)
- Materials
- Injection-molded engineering plastic with stainless steel locking clip.
- Releasing the PTFE Tube Properly
- Never yank the PTFE tube directly out. Push the top collar ring down against the housing body to collapse the internal steel teeth before pulling the tube straight up.
- Trimming Worn PTFE Ends
- If a PTFE tube loses its grip inside the press-fit head due to worn grooves, trim approximately 5 mm square off the tube tip using a dedicated PTFE tube cutter before re-inserting.
- Checking Insertion Depth
- Ensure the PTFE tube is pushed all the way down until it seats firmly against the lower internal stop inside the fitting; leaving a gap can cause filament to bind during multi-color swaps.
- Item Weight
- 6 g
- Item Outer Dimensions (Diameter × Height)
- 12mm x 16mm
