Anycubic
Anycubic SP Kobra X Series PEI Spring Steel
Κωδικός παραγγελίας: 30766
- Surface Coating:Powder-coated Polyetherimide (PEI)
- Core Material:High-tensile spring steel alloy
- Compatible Filaments:PLA, PETG, ABS, TPU, ASA, Wood/Silk composites
- Max Bed Temperature:Up to 110C without de-bonding
- Part Removal Method:Thermal release + manual flex plate bending
- Όλα τα χαρακτηριστικά
49,99 €με ΦΠΑ
Μη διαθέσιμο
Περιγραφή
- The Anycubic PEI Spring Steel Build Plate is the magnetic print surface used across the Anycubic Kobra series. It combines a flexible spring steel core with a high-temperature Polyetherimide (PEI) coating, engineered to provide strong first-layer adhesion during printing and effortless part removal once cooled.
- Textured PEI Surface: The micro-textured coating leaves a fine matte finish on the bottom of prints while gripping molten plastic tightly at operating bed temperatures (60C - 100C).
- Flex-to-Release Removal: Built on a spring steel alloy that snaps back into shape after bending. Once the bed cools down below 40C, most prints pop off naturally; stubborn models release easily with a quick flex of the plate.
- Dual-Sided Usability: Replacement sheets feature PEI coating on both sides, allowing you to flip the plate if one side gets worn or scratched.
- Magnetic Alignment: Designed to drop directly onto the heated bed's magnetic base plate with rear locating notches for alignment.
Χαρακτηριστικά
- Surface Coating
- Powder-coated Polyetherimide (PEI)
- Core Material
- High-tensile spring steel alloy
- Compatible Filaments
- PLA, PETG, ABS, TPU, ASA, Wood/Silk composites
- Max Bed Temperature
- Up to 110C without de-bonding
- Part Removal Method
- Thermal release + manual flex plate bending
- Wipe Down Before Printing
- Wipe the PEI surface with 99% Isopropyl Alcohol (IPA) and a lint-free microfiber cloth to remove finger oils, which are the #1 cause of first-layer lifting.
- Avoid Metal Scrapers
- Never use sharp metal scrapers or razor blades directly on PEI. Plastic scrapers are safe if a print needs gentle nudging.
- Never Use Acetone
- Avoid cleaning PEI with acetone or harsh chemical solvents, as acetone breaks down and degrades the PEI coating over time.
- Always Wait for Cool-Down
- Flexing the plate while it is still hot can strip or warp the PEI layer over long-term use.
