Anycubic
Anycubic SP Kobra X Series ACE GEN2 Hot End Cutter Assembly
Κωδικός παραγγελίας: 30769
- Compatible printers:Anycubic Kobra X / Kobra X Combo Series
- Printhead System:ACE GEN2 Printhead Module
- Primary Blade Material:Hardened stainless / carbide steel
- Function:Automatic filament strand severing prior to retraction/unload
- Installation Hardware:M2.0 hex socket screws (S2.0 hex key required)
- Όλα τα χαρακτηριστικά
55,99 €με ΦΠΑ
Αποστολή σε 2-4 εργάσιμες
Δωρεάν παραλαβή από το κατάστημα
Περιγραφή
- The Anycubic Kobra X Series ACE GEN2 Hot End Cutter Assembly is the official OEM modular cutting unit built specifically for the Kobra X toolhead. It handles clean, mechanical filament severing during automatic material retracts and multi-color spool changes via the Anycubic ACE unit.
- Integrated Shear Action: Positioned directly above the hotend heat break entry path, it cleanly cuts off the softened end of the filament strand before the material is pulled back through long PTFE tubes.
- Jam Prevention: Slicing the molten tip flush prevents bulbous or stringy filament ends from getting stuck inside the printhead, selector hub, or feeding channels.
- High-Precision Carbide Blade: Equipped with an ultra-sharp, wear-resistant steel cutter blade that maintains a clean shearing edge across standard (PLA, PETG) and tough filaments (ABS, ASA, TPU).
- Torsion Spring Auto-Reset: Employs an internal recoil spring that immediately pulls the cutter lever arm back out of the filament channel after being pressed by the printer frame's actuation pin.
- Modular Direct Drop-In: Secures inside the ACE GEN2 printhead housing via dedicated fixing screw mounts, allowing quick replacement without tearing down the entire extruder gear drive.
Χαρακτηριστικά
- Compatible printers
- Anycubic Kobra X / Kobra X Combo Series
- Printhead System
- ACE GEN2 Printhead Module
- Primary Blade Material
- Hardened stainless / carbide steel
- Function
- Automatic filament strand severing prior to retraction/unload
- Installation Hardware
- M2.0 hex socket screws (S2.0 hex key required)
- Service Tool
- Requires a standard S2.0 Hex Key to unscrew the housing and mounting plate.
- Safety Prep
- Always power down the machine before servicing to avoid shorting any exposed cooling fan wiring or thermistor leads inside the printhead shell.
