Anycubic SP Kobra 3 max/combo Extruder Components

Κωδικός παραγγελίας: 30787

Compatible Models:Anycubic Kobra 3 / Kobra 3 Combo / Kobra 3 Max
Drive Type:Dual-Gear Direct Drive
Filament Compatibility:1.75 mm (PLA, PETG, ABS, TPU, ASA, PET-CF, PA-CF)
Gear Material:High-hardness hardened tool steel.
Inspect Drive Gear Teeth Periodically:Filament dust or plastic shavings can build up between the dual gear teeth over time. Clean the gear teeth using a small wire brush or compressed air to prevent feeding slippage.
Όλα τα χαρακτηριστικά

72,99 €με ΦΠΑ

Μη διαθέσιμο

Περιγραφή

The Anycubic Kobra 3 Series / Kobra 3 Max Extruder Components Assembly: is the dual-gear direct drive mechanism responsible for feeding, retracting, and precisely metering filament into the hotend during high-speed printing (up to 600 mm/s).This module houses the hardened steel drive gear system, stepper motor integration interface, tension lever spring mechanism, and the integrated mechanical filament cutter mechanism used during multi-color filament purges with the ACE Pro system.
Dual-Gear Direct Drive System: Utilizes hardened steel drive gears with high reduction gearing to deliver high torque, preventing filament slipping and grinding under rapid acceleration.
Integrated Mechanical Filament Cutter: Built-in cutter lever mechanism cuts the filament tail cleanly above the heat break during automatic color changes and retract sequences.
High Volumetric Flow Performance: Optimized gear geometry ensures smooth pushing force across flexible (TPU) and rigid high-temp filaments (ABS/PET-CF) without buckling inside the feed path.
Adjustable Tension Mechanism: Features an adjustable tension screw to fine-tune gear grip force according to the hardness and flex of the material being extruded.

Compatible Models: Anycubic Kobra 3 / Kobra 3 Combo / Kobra 3 Max
Drive Type: Dual-Gear Direct Drive
Filament Compatibility: 1.75 mm (PLA, PETG, ABS, TPU, ASA, PET-CF, PA-CF)
Gear Material: High-hardness hardened tool steel.
Inspect Drive Gear Teeth Periodically: Filament dust or plastic shavings can build up between the dual gear teeth over time. Clean the gear teeth using a small wire brush or compressed air to prevent feeding slippage.
Set Correct Idler Tension: Avoid over-tightening the tension screw on soft materials like TPU to prevent deforming the filament into an oval shape, which causes clogs inside the lower PTFE throat tube.
Verify Cutter Blade Alignment: After mounting a replacement S010349 assembly, manually actuate the cutter lever to confirm the internal spring returns the blade fully so it doesn't obstruct incoming filament.
Item Weight ‎: ~ 95 g to 120 g
Extruder Assembly Dimensions: ~ 58 x 48 x 42 mm