Anycubic
Anycubic SP Kobra 3 max/combo PEI Spring Steel
Κωδικός παραγγελίας: 30779
- Compatible Models:Anycubic Kobra 3 Max / Kobra 3 Max Combo
- Surface Coating:Dual-sided micro-textured PEI
- Supported Filaments:PLA, PETG, TPU, ABS, ASA, Wood/Silk composites.
- Clean with Isopropyl Alcohol (IPA):Wipe the PEI surface down with 99% IPA before major prints to remove oils from fingertips, which are the leading cause of first-layer lifting.
- Avoid Metal Tools:Do not use sharp metal scrapers or razor blades to pry models off; always let the bed cool down, then flex the steel plate slightly.
- Όλα τα χαρακτηριστικά
40,99 €με ΦΠΑ
Αποστολή σε 2-4 εργάσιμες
Δωρεάν παραλαβή από το κατάστημα
Περιγραφή
- The Anycubic Kobra 3 Max / Combo PEI Spring Steel Build Plate: is the large-format magnetic print surface designed specifically for the Anycubic Kobra 3 Max 3D printer. Featuring a flexible spring steel core with a textured Polyetherimide (PEI) coating, this sheet provides uniform adhesion across its expansive surface area and allows effortless removal of massive 3D prints once cooled down.
- Large-Format Flex Surface: Custom-sized for the Kobra 3 Max’s 420 x 420 x 500 mm, build volume, allowing large prints to pop off easily with a simple flex of the plate.
- Double-Sided Textured PEI Coating: Both sides feature a durable powder-coated PEI finish that grips hot filaments tightly during printing and releases them naturally when the bed cools down below 40°C.
- High-Temperature Resistance: Engineered to handle bed temperatures up to 90°C, without de-bonding, warping, or losing magnetic hold.
- Rear Alignment Notches: Includes precise cutouts along the rear edge that align with locating pins on the heated bed frame, ensuring accurate positioning every time.
Χαρακτηριστικά
- Compatible Models
- Anycubic Kobra 3 Max / Kobra 3 Max Combo
- Surface Coating
- Dual-sided micro-textured PEI
- Supported Filaments
- PLA, PETG, TPU, ABS, ASA, Wood/Silk composites.
- Clean with Isopropyl Alcohol (IPA)
- Wipe the PEI surface down with 99% IPA before major prints to remove oils from fingertips, which are the leading cause of first-layer lifting.
- Avoid Metal Tools
- Do not use sharp metal scrapers or razor blades to pry models off; always let the bed cool down, then flex the steel plate slightly.
- No Acetone
- Never use acetone or aggressive solvents on the PEI coating, as it degrades the polymer layer over time.
- Item Weight
- 970 g
- Steel Sheet Dimensions
- (Width × Depth) 430 x 429 mm
- Sheet thickness
- 0.6mm
