Anycubic
Anycubic SP Kobra X Series Screen Components
Κωδικός παραγγελίας: 30775
- Power Off Before Swapping:Always power down and unplug the printer before connecting or disconnecting the screen ribbon cable to avoid shorting low-voltage pins.
- Handle Ribbon Cable with Care:Ensure the flex ribbon connector is fully inserted into the locking ZIF socket on the back of the board without twisting or crimping the ribbon.
- Keep Clean:Clean the screen using a dry, soft microfiber cloth. Avoid spraying isopropyl alcohol (IPA) directly on the screen seams to keep liquid from seeping behind the glass matrix.
- Item Weight :125 g
- Assembly Housing Dimensions (L × W × H):11.50 × 7.50 × 18.00 cm
44,99 €με ΦΠΑ
Αποστολή σε 2-4 εργάσιμες
Δωρεάν παραλαβή από το κατάστημα
Περιγραφή
- The Anycubic Kobra X Series Screen Components form the primary human-machine interface (HMI) for the printer. This modular assembly includes the capacitive touchscreen panel, protective bezel housing, and control PCB interface used to operate Kobra OS standalone without relying on external software.
- Responsive Touch Control: Houses a high-sensitivity capacitive touch panel designed for rapid response when tapping through menus, adjusting speed overrides, or managing active print files.
- Full Standalone Kobra OS Interface: Allows full access to live printing stats, temperatures, manual axis jog controls, 49-point auto bed leveling (LeviQ 3.0), and active multi-color slot settings.
- Modular Plug-and-Play Assembly: Includes the screen panel, structural mounting casing, and ribbon cable connector, allowing quick drop-in replacement if an original display breaks or becomes unresponsive.
- Low-Power Operation: Draws minimal power directly from the mainboard logic rail, reducing heat generation inside the screen housing.
Χαρακτηριστικά
- Power Off Before Swapping
- Always power down and unplug the printer before connecting or disconnecting the screen ribbon cable to avoid shorting low-voltage pins.
- Handle Ribbon Cable with Care
- Ensure the flex ribbon connector is fully inserted into the locking ZIF socket on the back of the board without twisting or crimping the ribbon.
- Keep Clean
- Clean the screen using a dry, soft microfiber cloth. Avoid spraying isopropyl alcohol (IPA) directly on the screen seams to keep liquid from seeping behind the glass matrix.
- Item Weight
- 125 g
- Assembly Housing Dimensions (L × W × H)
- 11.50 × 7.50 × 18.00 cm
