Welcome to Ubucy store
Product Suggestions

Noyafa Multi-Function Cable Tester with RJ11/RJ45, PoE, Fiber Optic OPM/VFL, NCV & Cable Length Measurement NF-8508

€115.00
  • Wire mapping & Continuity test: Check Cat5 & Cat6 Cables status. Display length and exact faults like opens, splits, shorts, and crossings on an LCD screen.
  • Cable trace: Adjustable signal strength indicator helps find cables from bundled cables, different rooms, walls, and ceilings. (300 meters/984 feet).
  • Length test: Measure the length of CAT5/CAT5e/CAT6 cables up to 200 meters (656 feet). Help prepare the suitable cables for installation.
  • Port flash: Sending signals through connected cables to flash ports on 10M/100M/1000M hubs, panels, routers, or switches. Sync frequency flashing on Port & LCD Screen.
  • PoE test: Diagnose the PoE network by listing pins of the power supply, and other statuses like voltage, polarity, and PSE(af or at standard).
  • Optical Power meter: Measure optical power and loss in single-mode optical fibers.
  • Visual Fault Locator: Quickly navigate Fiber break points with visible red lights.
  • RJ45 Head Test: Tell if RJ45 connectors are properly crimped.
  • NCV: Non-contact voltage detector on Receiver levels up safety and reduces chances of damaging devices.
Specification
  • CAT5/CAT6
  • 60V
  • Scan Frequency: 455KHz
  • √
  • Accuracy: ≤20M+/-1.6M, 20M~100M+/-2.4M, >100M+/-3.2M
  • Standard/Non Standard - End connection /Middle jumper /Powered by 8 cores - PoE Power supply
  • 10Mw
  • 1310/1550/1625 (Single-mode Wavelength)
  • RJ45-8 Cores,Min length is 210cm
  • 3.7V 1500mAh Polymer lithium battery
  • Type-C connector
  • √
  • √
  • √
Add a review